Pumps
Main pool pump
Complete variable-speed circulation pump.
$1,300–$2,450per unit · approximate installed
EQUIPMENT REPLACEMENT · ORANGE COUNTY
Better equipment.
A clearer budget.
Choose what needs replacing, see a ballpark installed price, and request an assessment by a licensed contractor.
Instant budget estimate No payment today Final scope confirmed on site
01
What needs replacing?
Select one item or build a whole equipment list.
Planning allowances, not a binding quote. Prices below include estimated equipment and standard replacement labor. Final equipment sizing and compatibility require inspection.
Pumps
Pump motor
Compatible replacement motor; pump housing retained.
$600–$1,300per unit · approximate installed
Pumps
Cleaner booster pump
Dedicated pressure-cleaner booster pump.
$600–$1,150per unit · approximate installed
Filters
Complete pool filter
Filter tank and internal assembly.
$1,050–$2,100per unit · approximate installed
Filters
Filter internals
Replacement elements; existing tank reused.
$300–$750per unit · approximate installed
Heating
Gas pool / spa heater
Compatible gas heater swap at the existing equipment pad.
$3,150–$5,000per unit · approximate installed
Heating
Electric heat pump
Heat pump replacement with suitable existing power.
$4,250–$7,000per unit · approximate installed
Heating
Solar pool heating
Roof array replacement depends on roof, panel count and plumbing.
Inspection neededCustom scope · price after assessment
Sanitation
Complete salt system
Controller and cell; compatible pool sizing to be verified.
$1,400–$2,550per unit · approximate installed
Sanitation
Salt cell only
Compatible cell replacement, existing controller retained.
$625–$1,250per unit · approximate installed
Sanitation
Chemical feeder
Inline or offline tablet feeder.
$250–$550per unit · approximate installed
Sanitation
UV / ozone sanitizer
Supplemental sanitation equipment.
$850–$1,950per unit · approximate installed
Controls
Pool automation
Compatible controls, wiring and system setup.
$1,350–$2,900per unit · approximate installed
Controls
Wi-Fi / remote interface
Compatible connectivity module for existing automation.
$400–$1,000per unit · approximate installed
Controls
Valve actuator
Motorized actuator on an existing serviceable valve.
$305–$600per unit · approximate installed
Controls
Timer / control relay
Existing circuit and enclosure must be suitable.
$255–$550per unit · approximate installed
Controls
Temperature / flow sensor
Compatible sensor replacement.
$140–$300per unit · approximate installed
Lighting
Underwater pool / spa light
Existing niche, conduit and circuit must be reusable.
$650–$1,400per unit · approximate installed
Cleaners
Automatic pool cleaner
Cleaner replacement and setup.
$350–$800per unit · approximate installed
Plumbing
Plumbing valve
Accessible valve replacement at the equipment pad.
$235–$510per unit · approximate installed
Plumbing
Pad plumbing / unions
Visible, accessible pipework; no excavation.
$180–$400per unit · approximate installed
Plumbing
Autofill / backflow assembly
Replacement scope and water-supply conditions vary.
$190–$450per unit · approximate installed
Other
Other / not sure
Tell us what is wrong. A contractor will assess the equipment.
Inspection neededCustom scope · price after assessment
02
A few installation details.
Help the contractor understand the job.
The calculator prices standard replacement work. New utility lines, circuits, relocation and other site upgrades need a separate contractor quote.
Before you replace it.
What equipment can I request?
Pumps, motors, filters, heaters, heat pumps, salt systems, cells, automation, lights, cleaners, valves and more. Solar heating, backflow assemblies and unusual equipment are assessed individually. Choose “Other / not sure” if you need a diagnosis.
Is this a guaranteed installed price?
No. These are illustrative planning allowances for standard replacements. The contractor checks model compatibility, sizing, site conditions, tax, permits and any extra work before giving a final quote.
Am I booking a licensed contractor immediately?
You are requesting contractor coordination. PoolSide must confirm availability and appropriate licensing before a contractor visit or installation is scheduled.
Can my existing equipment be repaired instead?
Possibly. Describe the problem in the request form. Ask the contractor to compare a repair with replacement after diagnosing the equipment. The calculator shows replacement budgets, not repair diagnosis prices.